EDIO Making every repair smarter Buy SmartCloneSmartClone

Hardware that heals hardware. SmartClone

ISP port 24Cxx · 25xx
Display EEPROM read · verify
IR 38 kHz
Controls Up · OK · Down

01 Physical repair

Repair is where intelligence begins.

Every repair holds four signals. Today they live in a technician's head or a notebook — and leave with them.

02 Captured information

Turn repair work into structured knowledge.

The same repair, written down properly: one schema for every case, with units and context on every measurement.

03 Structured data

The same schema, every time.

Structured repair cases: symptom, measurement, action, outcome. One case becomes one tile in a growing dataset.

Illustrative · repair-case schema in development

Operation
Standalone
Interfaces
UART, I²C, SPI, IR
Editor
On-device HEX

Built for the repair community.

SmartClone was designed from the bench outward, for every technician who fixes boards instead of throwing them away. It runs standalone, so it works in a small shop with no spare laptop, on a home visit, or on a crowded workshop table.

It covers the operations that decide whether a board is recoverable: talking to the system, reading and keeping its memory, editing contents where needed, writing back, and verifying the result.

A technician probing a board at his bench, with SmartClone connected beside him

Buy SmartClone.

Order on WhatsApp, or pay online and we ship it to you.

Drag to turn it around
SmartClone
₹8,000 incl. GST
Shipping
₹250
Total
₹8,250
Buy on WhatsApp

Secure payment by Razorpay: UPI, cards, net banking and wallets. See shipping and refunds.

Delivery details

SmartClone ₹8,000 + shipping ₹250 = ₹8,250

Six modes.

  1. 1. T-CON division, mapping, mirror

    A technician connects SmartClone to a T-CON board on a repair mat

    Fixes panel division, LVDS bit mapping and a mirrored image by correcting one byte, written and verified.

    • Auto-detects SPI flash or I²C EEPROM
    • Panel division 1 ↔ 2
    • JEIDA / VESA mapping and mirror

  2. 2. UART boot diagnostic

    SmartClone beside a TV main board on a repair bench

    Reads the boot stream live and shows on screen exactly where the board stops.

    • Auto-baud serial probe
    • Six boot stages tracked on the LCD
    • Flags boot loops and kernel panics

  3. 3. Panel ID copier

    SmartClone wired to a T-CON board, its screen showing WRITE OK

    Copies the panel ID EEPROM from the original chip to the replacement.

    • Read, archive to SD, write
    • Auto-detects address, size and banks
    • Addressing mode detected for you

  4. 4. T-CON PMIC programmer

    SmartClone and a multimeter checking a T-CON board's PMIC

    Edits panel voltages in millivolts, with range checks before anything is written.

    • The main panel voltages
    • A wide range of T-CON PMICs
    • Range-checked writes

  5. 5. IC programmer

    SmartClone wired through its adapter to a T-CON board

    Read, write, verify and erase the memory chips found on most boards.

    • 24Cxx EEPROM
    • 25xx SPI flash
    • SD archive and restore

  6. 6. IR mode

    SmartClone showing IR mode on its screen

    Service-mode codes for a range of TV brands, plus remote decoding.

    • Common IR remote protocols
    • Learn and replay
    • Code database and auto-match

TV panel division, fixed in 7 seconds.

SmartClone fixes a two-division display fault on a smart TV with plug-and-play operation — no computer or software required.

Device
Smart TV
Fault
Two-division display
Operation
Plug-and-play
Time
7 seconds
Watch on Instagram @edio_electronics

Technical specifications.

Platform and interfaces

Operation
Standalone — no computer or software needed
Display
Built-in colour screen
Controls
Three buttons — up, OK, down
Storage
SD card, for backups and archives
Interfaces
UART, I²C, SPI and infrared
Connection
USB, for updates and a computer link when wanted

Operations

Operating modes
Six
Memory chips
Common I²C EEPROMs and SPI flash, detected automatically
Panel power
Read and adjust supported T-CON PMICs, with range checks
Infrared
Decode, learn and replay remote codes
On-device editing
Hex viewer and editor
Verification
Read-back check after every write
Updates
Firmware updates over USB or SD card

See SmartClone fix a real board.

Ask for a demo, pricing or dealership details. The EDIO team is on WhatsApp.

Chat on WhatsApp